Bellinzoni Strong 2000 Sealer

Product Code: STRONG2000

Availability:Out of stock

Rs. 1,570.00 1,570.00

Bellinzoni Strong 2000 Sealer is a hydro repellent impregnator. It consolidates and protects marble, granite and other stone from water and humidity penetration. This product gives optimum protection from acid rains. An important function of Strong 2000 Sealer is consolidating action! It consolidates brittle and fragile stones (limestone, sandstone etc.) worn out by the weather that without a proper maintenance will further deteriorate. It is a transparent coating, it would be invisible after application. It protect stones without altering their natural beauty. It doesn’t allow mildew to appear on the surface.

Coverage: 8-15 square meter for area can be treated with 1 liter of product but it also depends on the porosity of stone.

NOTE: It is recommended to apply the product till complete saturation of the stone without interruption. Read and follow the instruction carefully printed on tin before use.

How to Apply Bellinzoni Strong 2000 Sealer?

Surface must be clean and dry, stains and crusting must be scrapped off. Application can be done by brush roller or by spray gun. It is suggested, when possible, to apply the product by brush because it allow the product to penetrate well into the stone. Repeat operation several times, with no interruption of the stone. Let the product dry naturally and the stone will be protected. In case of excess of product, the same can be removed using a cloth impregnated with string 2000.

General Tips to Use The Product

  • It is suggested to apply the product till the complete saturation of the stone.
  • On very absorbent material it is better to make application till complete saturation of the stone.
  • Don not dilute the product with any solvent or water, formulation is ready for use.
  • Material, before treatment, has to be completely dry.
  • For small pieces of stone, it is possible to apply the product by impression; it is also possible to use a sponge completely damped with Strong 2000 and apply it evenly on the surface.
  • Once the material has been treated it is necessary to wait 24 hours for complete polymerization.
  • In case of treatment of statues, decoration etc. pay attention to protect well cavities and corners
  • Read carefully recommendations printed on the tin before use.

Technical Characteristics of Bellinzoni Strong 2000 Sealer

Brand/Manufacturer Bellinzoni
Appearance Liquid
Color Transparent
Oder Of Solvent
Weight 1 Ltr and 5 Ltr
Specific gravity at 20°C 0,800 +\- 0,02
Hydro-solubility Non-Soluble
Viscosity at 20°C 12" Ford Cup
Safety Data Sheet Click here
For more information  technical data sheet