Original Krud Kutter: Upholstery Cleaner + Tile Cleaner + More
Product Code: KK012
Have a question?
Original Krud Kutter is an all-purpose cleaner and degreaser it is much more effective than ordinary cleaning chemicals. This earth friendly product is water soluble. Just mix one and half cup of cleaner in 4 liters of water to clean carpet, stainless steel, mini-blinds, metals, baseboard, fiberglass and more. This product can be from kitchen to garage floors. It is possible to treat 2,500 sq. ft. of area when 3.78 liters of original kurd kutter mixed in water with the ratio of 1:10! This can also be used for fabric.
It cleans latex paint, paint over spray, wallpaper adhesive, nail polish, shoe polish, pet stains, lipstick, brake dust, grease, oil, tape residue, oxidation, marker, crayon, tree sap, chewing gum, blood stain and more.
It is compatible with numerous surfaces such as wood, vinyl, aluminum, walls, tiles, patio furniture and more.
NOTE: This is not recommended for varnished surfaces or leather
Featured Video of Krud Kutter Cleaner and Degreaser
How to Use Original Krud Kutter?
For older, more difficult jobs, apply a generous amount of cleaner and allow to stand for a few minutes before wiping dry. For extremely tough jobs such as the removal of old, dried latex paint, scrub with a brush or scouring pad and wipe off with a wet rag. For engine cleaning, use on a cold, dry engine. Do not use on varnished surfaces or leather. Do not mix this product with any other chemicals.
Pressure Washer Application
Rinse surrounding plants with water before and after application. Wet the surface to be cleaned prior to applying the product. Place detergent application siphon tube and screen filter directly into container. Open the meter valve (if applicable) for maximum product flow. For reservoir machines, pour product (full strength) into pressure washer. Spray at low pressure onto a wet surface. On vertical surfaces, always spray from the top down. Allow product to remain on the surface for 3 to 5 minutes to penetrate. Do not allow product to dry on surface. Remove siphon tube from solution and rinse surface with high-pressure spray thoroughly. Flush siphon tube with clean water prior to storage.
Properties of Original Krud Kutter Cleaner and Degreaser
|Composition||Proprietary Blend of Biodegradable Surfactants, Detergents and Emulsifiers|
|Weight||946 ml and 3.78 Ltr.|
|Practical Coverage||200-300 sq.ft / 3.785 ltrs (Full Strenght)
2,200-3,300 sq. ft. / 3.785 ltrs (10 to 1)
6,200-9,300 sq.ft. / 3.785 ltrs (30 to 1)
|Caution!||In case of contact with eyes or skin, flush with water for at least 15 minutes.
If irritation persists, seek medical attention. If swallowed, take large
amounts of water. Do not induce vomiting. Get medical attention. KEEP OUT OF
REACH OF CHILDREN
|Safety Information||For additional information, see SDS|
|Technical Data Sheet||Click here|