Krud Kutter Rustex Rust Converter | Rust Neutralizer (Water-Based)

Krud Kutter Rustex Rust Converter is an innovative formula which converts iron oxide (technical name of iron rust) into iron phosphate. It makes surface suitable for painting, promotes adhesion, and enhance long lasting of coating. This bio-degradable formula treats 150 square feet of metal with 1 liter of solution.

NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.

Features of Rustex Rust Converter

• Stops rusting and prepares rusted metal for painting.
• Rust inhibiting coating which converts rusted metal overnight into a rust retarding, paintable surface.
• Easy to use, can be applied by brush, roller, mop or low pressure sprayer.
• Treats 600 sq. ft. per gallon (3.78 Ltr).

NOTE: For best result, use when temperature is above 2.2°C

Directions to Use Kurd Kutter Rustex Rust Converter

Old and Rusted Metal

For heavily soiled surfaces use the Original Krud Kutter to remove excess oil, grease and dirt. Remove loose paint and heavy rust with a wire brush. Light rust need not be removed. Apply directly to metal by brush, roller, mop, or low-pressure sprayer. Heavy rust may need two applications. Wait overnight after application, dust off any loose powder, and apply undercoat primer and paint. Test small area for compatibility when using epoxy or latex paint.

Galvanized Surface

Apply one coat, and let stand for 30-60 minutes or until metal is etched. Flush with water, avoiding damage to adjacent areas; or wipe to a smooth finish, let dry, and paint. Follow paint manufacturer’s instructions for undercoats and topcoats. Where rust is present apply one coat of Rustex to prep and etch the metal. Leave overnight, or until completely dry. Brush off any loose powder before painting.

Properties of Krud Kutter Rustex Rust Converter