Krud Kutter Must for Rust is rust inhibitor and remover. This fast acting chemical is effective on galvanized metal, stainless steel, iron, chrome, brass, aluminum and more. It is very convenient to use as it can be applied by brush, roller, dip and spray. This water-based formula penetrates into voids on the surfaces and dissolve rust and oxidation through chemical reaction.
NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.
Features of Rust Inhibitor
- Dip, brush or spray then rinse or wipe clean with a damp cloth to accept any primer, paint or coating.
- The proprietary formulation penetrates into every void of a metal surface and dissolves rust/oxidation through chemical action.
- Protects bare metal for up to 12 months.
- Safe, fast-acting, and effective on rusted or new metal.
Before treating metals, remove oil and grease from the surfaces by using stain remover.
Featured Video of Krud Kutter Rust Inhibitor - Must for Rust
How to Use Krud Kutter Rust Inhibitor
Remove oil and grease from the metal to be treated. Rinse the metal to break the surface tension and wash away loose dirt. Apply the remover by brush, spray or by dipping. Clean parts and allow to dry before reassembling. NOTE: Use plastic, glass or stainless steel containers. Disassemble units composed of moveable parts before cleaning.
Dissolving Rust from Iron and Steel
Apply the remover as required to penetrate the rust. Chemical action begins at once. Cleaning time will vary according to the rust. Medium to light rust will be dissolved in 30 minutes or less, while heavier deposits may require a second application.
Aluminium or Chrome
Apply the remover to wet surface. Allow time to clean, then rinse away with clean water and buff dry with a cloth.
Where surface is unbroken, treat as suggested for aluminum. Where rust is showing at the surface, treat as for iron or steel. New galvanizing is properly prepared for painting by applying the remover, allowing 3-5 minutes to work and then wiping the surface clean.
Properties of Krud Kutter Rust Inhibitor
|Composition||Phosphoric Acid and other Proprietary Ingredients|
|Weight||946 ml and 3.78 Ltrs|
|Practical Coverage||50-75 square feet|
Contains phosphoric acid. Severe eye and skin irritant. In case of contact with
eyes or skin, flush with water for at least 15 minutes. If irritation
persists, seek medical attention. If swallowed, take large amounts of water.
Do not induce vomiting. Get medical attention. KEEP OUT OF REACH OF CHILDREN.
|Safety Information||For additional information, see SDS|
|Technical Data Sheet||Click here|