Rust-Oleum NeverWet Auto Interior Spray is a liquid repelling treatment which is specially made for interiors of cars. This innovative product keeps automobile fabric dry for longer by repelling liquids. This crystal clear formula protects floor mats, carpet, car seats, leather, upholstery, and more from the damages of moisture, stains, water etc. This product is suitable to use for leather, cloth, synthetic fibers and natural fibers.
NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.
Features of NeverWet Auto Interiors
- Easy to use.
- Protect auto interiors from stains, moisture, and water.
- Coverage up to 20 square feet (depends on surface).
- Crystal clear formula.
NOTE: Don't allow soak or allow to puddle.
Featured Video of NeverWet Auto Interior Liquid Repelling Treatment
How to Use NeverWet Auto Interior Liquid Repelling Treatment
Conditions to Use
Use outdoors or in a well ventilated area. Open all car doors during application. Use when temperature is above 50ºF (10ºC) and humidity is below 85% to ensure proper drying. Avoid spraying in very windy and dusty conditions. Apply to a clean, dry surface.
Spraying / Application
Do not shake. A test spray is recommended to obtain a feel for the spray pattern. Test in an inconspicuous area before application for colorfastness. NeverWet Auto Interior may enrich light materials with a slightly darker tone. NeverWet Auto Interior is odorless when dry. Rotate nozzle to ON position. Spray coating 12-16" from the surface; coating the entire object until wet. Do not soak or allow to puddle. NOTE: If bubbles appear, lightly dab with a clean, lint-free rag. Re-apply periodically or when needed.
Properties of NeverWet Auto Interior Liquid Repelling Treatment
|Practical Coverage at Recommended DFT
(assumes 15% material loss)
|Coverage will vary depending on fabric.
60 sq.ft. on smooth/light
fabrics, 20 sq.ft. on textured/heavy fabrics
|Dry Times at 70-80ºF (21-27ºC) and
50% Relative Humidity
|Varies depending on fabric
Allow to dry 24 hours before exposing to water
|Shelf Life||2 years|
|Flash Point||114°F (45°C)|
|Safety Information||For additional information, see MSDS|
|Technical Data Sheet||Click here|