248655 248655 Automotive

Rust-Oleum Automotive Metallic Spray Paint - Aerosol Spray Paint

Product Code: 248655

Availability:Out of stock

Rust-Oleum Automotive Metallic Spray Paint a general purpose auto paint which is available in chrome, gold and aluminum finishes. This paint is particularly made for customizing interiors of vehicles like cars. This can be used on steering, instrumental panels, door panel, decorative applique parts, glove compartment and more. As far as its durability is concerned, it resists fading as well as wear even in presence of sunlight and extreme weather.

NOTE: It is not allowed to send this item through air mode. Surface mode is enabled for the same. Thus, shipping will be done through surface.

Features of Automotive Metallic Spray Paint

  • Delivers mirror like metallic shine.
  • One spray can covers 8-10 square feet of area.
  • Best for modification of vehicles’ interior.
  • Long lasting.

NOTE: If you are looking for metallic spray to paint exterior body of vehicle, you may use stops rust metallic spray paint which is available in several colors.

How to Apply Automotive Metallic Spray Paint?

Appropriate Conditions to Spray

Use outdoors or in a well-ventilated area such as an open garage. Use when temperature is between 50˚F and 90˚F (10˚-32˚C) and humidity is below 85% to ensure proper drying. Do not apply to surfaces that, when heated, exceed 200˚F (93˚C) or galvanized metal. Avoid spraying in very windy, dusty conditions. Cover surrounding area to protect from spray mist.


Use of a Rust-Oleum Primer provides added corrosion protection on metal and promotes adhesion and hiding. A primer is especially recommended for metal and plastic surfaces. Rust-Oleum Automotive Sandable Primer Spray is recommended for the same.

Surface Preparation

Remove loose paint and rust with a wire brush or sandpaper. Lightly sand glossy surfaces. Clean with soap and water, rinse and let dry. WARNING! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. Contact the National Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.


Shake can vigorously for one minute after mixing ball begins to rattle. Shake often during use. Hold can 10-16" from surface and spray in a steady back-and-forth motion, slightly overlapping each stroke. Keep the can the same distance from the surface. Keep the can in motion while spraying. For best appearance, apply two light coats a few minutes apart.

Properties of Rust-Oleum Automotive Metallic Aerosol Paint

Brand Automotive
Manufacturer Rust-Oleum
Resin Type Hydrocarbon Resin
Pigment Type Metallic
Solvents n-Butane, Naphtha, Toluene, Xylene
Weight 312 Grams
Recommended Dry Film
Thickness (DFT) Per Coat
1.0-2.0 mils (25-50µ)
Practical Coverage
at Recommended DFT
8-10 sq. ft./can
Dry Times at 70-80°F (21-27°C)
and 50% Relative Humidity
10 minutes to touch, re-coat any-time, full dry in 30 minutes
Shelf Life 5 years
Flash Point -141°F (-96°C)
Safety Information For additional information, see MSDS
For more information See TDS