DIY Project: How to Paint an Acoustic Guitar

If you are determined to having a specific color, or essentially need to try your hand at refinishing an old or cheap guitar, you can learn how to repaint a guitar yourself. This procedure is not much more difficult than refinishing any other wood object, but note that a large amount of careful effort is required to accomplish a smooth, factory appearance.

You can transform your acoustic guitar into a personalised work of art by utilising the wood as your canvas. It's simple, and though it takes a little time, you can do it in stages. It's one of the finest art projects you'll ever embark on.

How to Paint an Acoustic Guitar

What you need:

  • A guitar! 
  • Sand paper.
  • Painter’s tape.
  • Rag.
  • Newspaper or plastic.
  • Painter’s Touch Spray Paint.

Remove the guitar's strings & hardware stuff: You can clip the strings away utilizing your usual pair of string clippers. The output jack, pickups, bridge, knobs, strap buttons, and pickguard can usually be detached using a screwdriver. You will probably need to readjust your truss rod once you reassemble the guitar.

Use sandpaper or a sanding sponge for finish: For curved areas that are hard to reach with the orbital sander, utilize free sandpaper folded around a large dowel, or you can utilize a small sanding sponge.

Smooth the guitar's body: After using coarse-grit sandpaper to remove the finish, you'll need to smooth out the wood utilizing progressively finer grains of sandpaper. Work the entire body over with medium-grit sandpaper, and then go over it again using fine-grit sandpaper.

Be sure to paint in a dust-free environment: There are numerous air particles in the great outdoors even on a clear day that will seriously ruin your finish, including bugs that will be attracted to the odor! There are various air particles in nature even on a crisp morning that will truly damage your complete - including bugs that will be attracted to the scent!

Apply the Painter’s Tape: If there are areas of the guitar you would prefer not to paint, apply painter's tape to those places. 

Let’s Paint: It's best to shake the can of Painter’s Touch Spray Paint for 1 minute after the mixing ball starts to rattle to ensure a well-mixed color. Then, Start spraying the paint onto the guitar in back-and-forth motions approximately 10" from the surface. For optimum coverage, applying 2-3 light coats. Also, give some time each coating for drying for best results.

Final Touch to Guitar: After your final coat of paint has been sprayed, let the guitar dry for about 20 minutes before removing the painter's tape and 1 hour before handling. All of the paint will be fully dry in 24 hours.

Tip: Sketch out your ideas on paper before you apply spray to guitar. Painting an acoustic guitar is a great kid project, too, especially if your young ones are fascinated with this.